Wednesday, September 19, 2012

Communications settings for STEP 7 Micro/WIN and the RS-232/PPI Multi-Master cable




1. Click on the STEP 7 Micro/WIN icon to open a new project.

2. Click on the Communications icon in the navigation bar to display the Communications dialog box. You use this dialog box to set up the communications for STEP 7 Micro/WIN.
communications for STEP 7 Micro/WIN

3. Verifying the Communications Parameters for STEP 7 Micro/WIN
The example project uses the default settings for STEP 7 Micro/WIN and the RS-232/PPI Multi-Master cable. To verify these settings:

3.1. Verify that the address of the PC/PPI cable in the Communications dialog box is set to 0.

3.2. Verify that the interface for the network parameter is set for PC/PPI cable (COM1).

3.3. Verify that the transmission rate is set to 9.6 kbps.
Verifying the Communications Parameters for STEP 7 Micro/WIN

4. Establishing Communications with the S7-200
Use the Communications dialog box to connect with your S7-200 CPU:

4.1. Double-click the refresh icon in the Communications dialog box.
STEP 7 Micro/WIN searches for the S7-200 station and displays a CPU icon for the connected S7-200 station.

4.2. Select the S7-200 and click OK.
Establishing Communications to the S7-200

If STEP 7--Micro/WIN does not find your S7-200 CPU, check the settings for the communications parameters and repeat these steps.
After you have established communications with the S7-200, you are ready to create and download the example program.


Labels:



Newer Post Older Post Home

You may also like these ebook:

Get Free PLC eBook directly sent to your email,
and email subscription to program-plc.blogspot.com




We hate SPAM. Your information is never sold or shared with anyone.

Your Email Will Be 100% Secured !

Your email is stored safely on Google FeedBurner