Software configuration for XI/ON and WINbloc
Right away online, directly viewed, immediately tested. The assistant of I/O offers a common device that supports cooperatively all over the phase of preparation and implementation of the system XI/ON. First, you have to create and organize a project on screen. You need to choose gateways, modules of electronics/base and the suitable accessories. After that you organize the individual stations either online or offline. Once all are set to your fulfillment, you can place the whole system into operation.
Commissioning with no a master of fieldbus
The I/O assistant confirms the station, interprets in process data, outputs values and thinks about the channels diagnostics data. In this method you can order your station with no a higher-level controller and make sure that parts of the system are working correctly. You locate the outputs and adjust values straight from the PC. You can right away outlook the behavior of your function by forcing the values. You can consequently confirm the field wiring, for instance, with no having a fully installed of the control system.
The I/O assistant incorporated XSoft CoDeSys 2 is the particular configuration tool for XI/ON and can also be contacted from within XSoft CoDeSys 2. You can consequently create full use of all I/O assistant functions for interactive planning and execution of your remote station of XI/ON with no having to exit XSoft CoDeSys 2. Right away online, immediately viewed, directly tested! The I/O assistant offers you with a general tool that supports you interactively all over the planning and execution stage of your system of XI/ON. First, you have to make and makeup a project on screen. To do this, you choose gateways, modules of electronics/base and the suitable accessories. After that you organize each stations either online or offline. Once all are set to your satisfaction, you can set the whole system into process.
Support EPLAN
The macros of EPLAN are accessible for the I/O system of XI/ON modular. This saves the time necessary for configuring and helps to avoid errors in configuration.
Design and parts list creation
When the planning has been finished, the software can create a detailed documentation of project that contains parts lists.
Openness
•The product range of gateway supports the Profibus-DP, CANopen, Ethernet fieldbus, and DeviceNet systems
•The modules can be utilized for all bus
Interface of Ethernet Service
•Station commissioning without head-end controller
•Diagnostics of station
•Interface of programming
Labels:
PLC Codesys
PLC Codesys