Fuji Electric PLC is well known Fuji Electric electronics manufacturing product which is used many automation companies around the world. As an experts in electronics manufacturing and pioneers of cutting-edge energy technology Fuji Electric provides total solution for automation products such as Drives & Inverters, Semiconductors & Devices, Power Supply, Sensors & Measurements, and Factory Automation Systems. In the Factory Automation Systems category, there are 6 steps of CPU module carries out ultra-high-speed processing as below:SPH3000MG: 6 ns SPH3000/SPH3000MM: 9 ns SPH300: 20 ns SPH2000: 30 ns SPH200: 70 ns.
All of them are Multi CPU configuration exclude SPH200. Detail products would be explained as below:
SPH200, high-speed controller processing unit performed through load distribution
There are 2 models of SPH200 namely NP1PH-08, NP1PH-16 supported by FEH201MICREX-SX SPH Hardware to provide ultra-high-speed processing as below: SPH200: 70 ns. This controller processing unit supported Up to 8 CPUs can be configured. It can be high speed controller unit performed through load distribution.
SPH300, the processing controller unit feature backup to improve system safety and reliability
There are 5 models of SPH300 namely NP1PS-32, NP1PS-32R, NP1PS-74R, NP1PS-117R, NP1PS-245R supported by FEH201MICREX-SX SPH Hardware to provide ultra-high-speed processing as below: SPH300: 20 ns. It is upport redundancy and warm-standby feature, and completed by compliance international standard language so make it easy to be comprehended worldwide. This is Multi-CPU system applicable to up to 8 CPUs and Parallel processing with up to 8 CPUs. It is compatible with USB and user ROM and Large-capacity battery and the memory backup time can be extended to a max. of 3.5 years (at 25℃).
SPH2000, Realizes High-Speed Advanced Machine Control to provide ultra-high-speed processing
There are 3 models of SPH2000 namely NP1PM-48R, NP1PM-48E, NP1PM-256 supported by FEH201MICREX-SX SPH Hardware and Realizes High-Speed Advanced Machine Control to provide ultra-high-speed processing as below: SPH2000: 30 ns . This processing unit has program scan time of 1ms is implemented by increased instruction processing speed and provide real number operation and high-precision positioning control.
SPH3000MM, processing unit completed by Ethernet Communications which is suitable for processing requiring strict tact time
There are 2 models of SPH3000MM namely NP1PU2-048E, NP1PU2-256E supported by FEH201MICREX-SX SPH Hardware to provide ultra-high-speed processing as below: SPH3000MM: 9 ns ns. It is completed by FEH193 MICREX-SX SPH2000 Ethernet Communications which is suitable for processing requiring strict tact time. Easy to practical use by dramatically improved floating-point operation speed.
SPH3000MG, processing unit fixed with I/O refresh interval
There are 3 models of SPH3000MG namely NP1PU-048E, NP1PU-256E, NP1PU-128E supported by FEH201 MICREX-SX SPH Hardware to provide ultra-high-speed processing as below:SPH3000MG: 6 ns . It is assures a fixed I/O refresh interval that enable Tact control can be set to 1 ms, 2 ms, or up to 10 ms, The minimum tact times can be set at 0.25 ms, 0.5 ms, and 1 ms, respectively.
SPH3000 for advanced processing and sequence control processing with additional CPUs
There are 3 models of SPH3000 namely NP1PU-048E, NP1PU-256E, NP1PU-128E supported by FEH201 MICREX-SX SPH Hardware to provide ultra-high-speed processing as below: SPH3000: 9 ns. This processing unit supported by parallel cperations units of CPUs allowing high-speed processing of a large application program
Conclusion
After you learn the 6 items Fuji Electric PLC product and specification as explained above, you will understand how to choose proper product based on your design plan. Proper and reliable product will be able to provide total solution. One of advanced technology recently use load distribution system to improve system safety and reliability. It can be support by Fuji Electric PLC products.
