Commonly force sensors and strain sensor used strain gauge and load cell that very sensitive to mechanical force changes, one of them are Baumer force sensors and strain sensors. This Baumer force sensors and strain sensors are reasonably priced and easy to obtain and as well as considerable coverage in measurements and can be used more than one fruit to increase the sensitivity in measurements and indirect measuring.
Baumer force sensors and strain sensors has working process efficiently for example If the pressure on the object changes, the foil or wire will be deformed, and the electrical resistance of the tool will change.
Image by http://www.baumer.com
User can use many options type of product with supplier supporting process optimization efforts as below:
• Baumer Stain ring DSRC with strain measurement at this Stain ring and also can measure until for about 1001 με with curve deviation less then < 1,1% FSR
• Baumer Strain probe DSRK to increase lifetime. This was supported with free maintenance process to measure range 0 to 1001 με
• Baumer Strain links DSRT with strain measurement on rigid structures. This Strain links DSRT can measure until for about 751 με with curve deviation less then < 0,81 % FSR
• Baumer Bridge amplifier DABx with 2,1 x 0,25% bridge or full bridge for current or voltage output of 1 channel
• Baumer Displaybox DDBF with signal analysis of strain rings. This strain probes was also enable to display range ±1998 με with 2 and 4 channels options.
• Baumer Piezo electric force sensor DLPP with dynamic forces measurement. This Piezo electric force sensor ensure to measure range from 251 N to 31 kN with linearity lower then 1,1% FSR
• Baumer Accessories / Tool / Cable DZxx with variety of mounting accessories. This accessories enable to used in piezo electric sensors and cables with temperature rang tolerance up to +221° C
• Baumer Industrial multi range charge amplifier DACx completed with analysis of piezo electric sensor products. This sensor enable to measure with range more then from 100 pC with curve deviation lower then 1,1% FSR
• Baumer Cavity pressure sensor DPPC for direct and indirect cavity pressure measurement system. This sensor can measure until 2000 bar with linearity lower then 1,1 % FSR and can be applied on holding force control systems.
Baumer force sensors and strain sensors has working process efficiently for example If the pressure on the object changes, the foil or wire will be deformed, and the electrical resistance of the tool will change.
Baumer force sensors and strain sensors cost-efficiently and customer oriented implementation
Baumer force sensors and strain sensors has good precision low then 0.2% FS and more then 10, 1 million cycles guaranteed to prove that this product has good closing process. This specification will make you more comfort to use this product:- It has the smallest possible temperature drift
- Compatible with advanced injection machines
- Applicable in all condition such as in crude oil drilling machies
- To be more powerfull used in electromechanical brakes for wind power plants
- Can be implemented on process monitoring and quality assurance for many industries such as food industry and in medical engineering.
User can use many options type of product with supplier supporting process optimization efforts as below:
Baumer force sensors and strain sensors products type and specification
• Baumer Load Cell DLRx with static and dynamic force measurement. This load cell can measure until 0,51 to >100kN with curve deviation less then 0,31 % FS• Baumer Stain ring DSRC with strain measurement at this Stain ring and also can measure until for about 1001 με with curve deviation less then < 1,1% FSR
• Baumer Strain probe DSRK to increase lifetime. This was supported with free maintenance process to measure range 0 to 1001 με
• Baumer Strain links DSRT with strain measurement on rigid structures. This Strain links DSRT can measure until for about 751 με with curve deviation less then < 0,81 % FSR
• Baumer Bridge amplifier DABx with 2,1 x 0,25% bridge or full bridge for current or voltage output of 1 channel
• Baumer Displaybox DDBF with signal analysis of strain rings. This strain probes was also enable to display range ±1998 με with 2 and 4 channels options.
• Baumer Piezo electric force sensor DLPP with dynamic forces measurement. This Piezo electric force sensor ensure to measure range from 251 N to 31 kN with linearity lower then 1,1% FSR
• Baumer Accessories / Tool / Cable DZxx with variety of mounting accessories. This accessories enable to used in piezo electric sensors and cables with temperature rang tolerance up to +221° C
• Baumer Industrial multi range charge amplifier DACx completed with analysis of piezo electric sensor products. This sensor enable to measure with range more then from 100 pC with curve deviation lower then 1,1% FSR
• Baumer Cavity pressure sensor DPPC for direct and indirect cavity pressure measurement system. This sensor can measure until 2000 bar with linearity lower then 1,1 % FSR and can be applied on holding force control systems.