Hardy’s single-slot Rockwell® PLC/PAC weighing modules provide basic weight data or are loaded with sophisticated algorithms and good news for us because it has available for Allen-Bradley® ControlLogix®, and CompactLogix® to loss-in-weight control, POINT I/O for filling or dispensing, ND Micro800® or SLC500 chassis for backplane to the processor.
Rockwell® PLC/PAC weighing modules enable to read and condition data from strain gage load cells used in a wide variety of applications to perform application-specific industrial weighing processes and communicate it over the I/O chassis. This simple batch weighing enables to allow them to operate as stand-alone controllers or provide weight and flow rate data to the processor.
Image by https://www.hardysolutions.com
Rockwell® PLC WEIGHING MODULES having two popular products name namely HI 1756-NDF and HI 1746-WS. What’s the best description for these products? Here is the explanation:
Rockwell® PLC WEIGHING MODULES HI 1756-NDF is solution for variety of material feed applications of the feed are paramount rates to the process.
Rockwell® PLC WEIGHING MODULES HI 1746-WS has the ability to tolerate large “dead” loads, over sizing of load cells/sensors monitor to detect load cell wiring problems. This controlling management system completed with more than nine hundred million counts of display resolution.
Rockwell® PLC/PAC weighing modules enable to read and condition data from strain gage load cells used in a wide variety of applications to perform application-specific industrial weighing processes and communicate it over the I/O chassis. This simple batch weighing enables to allow them to operate as stand-alone controllers or provide weight and flow rate data to the processor.
Rockwell® PLC WEIGHING MODULES having two popular products name namely HI 1756-NDF and HI 1746-WS. What’s the best description for these products? Here is the explanation:
Rockwell® PLC WEIGHING MODULES HI 1756-NDF, Appropriate Module for Running to a variety of material feed applications
Rockwell® PLC WEIGHING MODULES HI 1756-NDF is specific purpose specific weight controllers for several setting up system like Batching/Blending, Filling/Dispensing, Check Weighing, Level by Weight. In some cases, ti was also used for force measurement, and Rate Monitoring to name a few use Add-On-Profiles (AOP) for ease of integration.Rockwell® PLC WEIGHING MODULES HI 1756-NDF is solution for variety of material feed applications of the feed are paramount rates to the process.
Rockwell® PLC WEIGHING MODULES HI 1746-WS transmitted based on data via the backplane to the SLC at any time for rising better data transmission
Rockwell® PLC WEIGHING MODULES HI 1746-WS focuses on self-contained microprocessor-based I/O module with two (2) relays via two (2) TTL level outputs. This output can be transmitted based on data via the backplane to the SLC at any time for rising better data transmitted. One of 20 bit A-D converter need provide accurate weight measurement and control.Rockwell® PLC WEIGHING MODULES HI 1746-WS has the ability to tolerate large “dead” loads, over sizing of load cells/sensors monitor to detect load cell wiring problems. This controlling management system completed with more than nine hundred million counts of display resolution.