Connecting the RS-232/PPI Multi-Master Cable and SIMATIC S7-200 Micro PLC


RS-232/PPI Multi-Master cable connecting the SIMATIC S7-200 Micro PLC to the programming device. To connect the cable:

1. Connect the RS-232 connector (marked “PC”) of the RS-232/PPI Multi-Master cable to the communications port of the programming device, example: connect to COM 1 in computer.

2. Connect the RS-485 connector (marked “PPI”) of the RS-232/PPI Multi-Master cable to Port 0 or Port 1 of the SIMATIC S7-200 Micro PLC.

3. Ensure that the DIP switches of the RS-232/PPI Multi-Master cable are set as shown in below:

RS-232/PPI Multi-Master cable connecting the SIMATIC S7-200 Micro PLC
Programming Cable and Order Number:
Programming Cable: RS-232/PPI Multi-Master, Order Number: 6ES7 901-3CB30-0XA0
Programming Cable: USB/PPI Multi-Master, Order Number: 6ES7 901-3DB30-0XA0

Source: www.siemens.com

http://program-plc.blogspot.com/2012/09/ppi-multi-master-cables-and-step-7.html

http://program-plc.blogspot.com/2012/08/setting-ip-address-of-ethernet-module.html
Home

Featured Post

Modbus Serial Communication between PLC and Unity3D Game Engine

This article about how to connection PLC to Unity3D Game Engine using Modbus Serial Communication. in Unity3D Game Engine using C# (C Sharp...

You may also like these ebook:

Get Free PLC eBook directly sent to your email,
and email subscription to program-plc.blogspot.com



We hate SPAM. Your information is never sold or shared with anyone.


Blog Archive