PLC Keyence Programming for Assembly Line

PLC Type KV Keyence , Name Input / Output PLC :
0000 ; Push Button Emg Operator 1
0001 ; Push Button Finish Operator 1
0002 ; Push Button Emg Operator 2
0003 ; Push Button Finish Operator 2
0004 ; Push Button Emg Operator 3
0005 ; Push Button Finish Operator 3
0006 ; Push Button Emg Operator 4
0007 ; Push Button Finish Operator 4
0008 ; Push Button Emg Operator 5
0009 ; Push Button Finish Operator 5
0010 ; Sensor 1
0011 ; Sensor 2
0012 ; Sensor 3
0500 ; Motor Conveyor
0501 ; Emg Lamp Red Operator 1
0502 ; Finish Lamp Yellow Operator 1
0503 ; Proses Lamp Green Operator 1
0504 ; Emg Lamp Red Operator 2
0505 ; Finish Lamp Yellow Operator 2
0506 ; Proses Lamp Green Operator 2
0507 ; EmgLamp Red Operator 3
0508 ; Finish Lamp Yellow Operator 3
0509 ; Proses Lamp Green Operator 3
0510 ; Emg Lamp Red Operator 4
0511 ; Finish Lamp Yellow Operator 4
0512 ; Proses Lamp Green Operator 4
0513 ; Emg Lamp Red Operator 5
0514 ; Finish Lamp Yellow Operator 5
0515 ; Proses Lamp Green Operator 5


Please Download Image : PLC Keyence Programming

Please Download Programming for KV Builder : PLC Keyence Programming


Reading PLC Programming for Assembly Line :
Step 1 :
If 0000=ON And 0002=ON And 0004=ON And 0006=ON And 0008=ON Then 1000=ON.
Step 2 :
a. If 1000=ON And 0001=ON Then Holding 1001=ON ( SET ).
b. If 1000=ON And 0003=ON Then Holding 1002=ON ( SET ).
c. If 1000=ON And 0005=ON Then Holding 1003=ON ( SET ).
d. If 1000=ON And 0007=ON Then Holding 1004=ON ( SET ).
e. If 1000=ON And 0009=ON Then Holding 1005=ON ( SET ).
Step 3 :
a. If 1000=OFF Or 1007=ON Then Not Holding 1001=OFF ( RES ).
b. If 1000=OFF Or 1007=ON Then Not Holding 1002=OFF ( RES ).
c. If 1000=OFF Or 1007=ON Then Not Holding 1003=OFF ( RES ).
d. If 1000=OFF Or 1007=ON Then Not Holding 1004=OFF ( RES ).
e. If 1000=OFF Or 1007=ON Then Not Holding 1005=OFF ( RES ).
Step 4 :
If 1001=ON And 1002=ON And 1003=ON And 1004=ON And 1005=ON Then 1006=ON.
Step 5 :
a. If 1000=ON And 0010=ON And 0011=OFF And 1006=ON And C000=OFF Then 1007=ON ( Latching ON ).
b. If C000=ON Then 1007=OFF ( Latching OFF ).
Step 6 :
a. If 1000=ON And 1007=ON And 0012=ON Then Differentiate Up 1008=ON.
b. If 1008=ON Then Count Up C000.
c. If Count C000>= 2 Then C000=ON.
d. If 1000=OFF Or 1007=OFF Then Reset C000 / Count C000=0.
Step 7 :
If 1000=On And 1007=ON Then Differentiate Down 1009=ON.
Step 8 :
a. If 1000=ON And 1009=ON And 1006=OFF Then 1010=ON ( Latching ON ).
b. If 1006=ON Then 1010=OFF ( Latching OFF ).
Step 9 :
a. If 1010=ON Then Count Up C001.
b. If 1010=ON Then Count Up C002.
c. If 1010=ON Then Count Up C003.
d. If Count C001>= 1 Then C001=ON.
e. If Count C002>= 2 Then C002=ON.
f. If Count C003>= 3 Then C003=ON.
g. If 1000=OFF Then Reset C001 / Count C001=0, Reset C002 / Count C002=0, Reset C003 / Count C003=0.
Step 10 :
If 1000=ON And 1007=ON Then 0500=ON.
Step 11 :
a. If 0000=OFF Then 0501=ON.
b. If 0000=ON And 1001=ON Then 0502=ON.
c. If 0000=ON And 0010=ON And 1001=OFF Then 0503=ON.
Step 12 :
a. If 0002=OFF Then 0504=ON.
b. If 0002=ON And 1002=ON Then 0505=ON.
c. If 0002=ON And 1010=ON And ( C001=ON Or 0011=ON ) And 1002=OFF Then 0506=ON.
Step 13 :
a. If 0004=OFF Then 0507=ON.
b. If 0004=ON And 1003=ON Then 0508=ON.
c. If 0004=ON And 1010=ON And ( C002=ON Or 0011=ON ) And 1003=OFF Then 0509=ON.
Step 14 :
a. If 0006=OFF Then 0510=ON.
b. If 0006=ON And 1004=ON Then 0511=ON.
c. If 0006=ON And 1010=ON And ( C003=ON Or 0011=ON ) And 1004=OFF Then 0512=ON.
Step 15 :
a. If 0008=OFF Then 0513=ON.
b. If 0008=ON And 1005=ON Then 0514=ON.
c. If 0008=ON 0011=ON And 1005=OFF Then 0515=ON.


See : PLC Holdings / Latching

See : Simulator Make Counter PLC

See : Definition Function SET , RESET for PLC

See : Definition Function DIFD, PLF, for PLC

See : Definition Function DIFU , PLS for PLC

See : Assembly Line

Labels:
Keyence PLC
PLC for Assembly Line
PLC Simulation