PLC Mitsubishi Programming for Forming of Spiral for Binding Machine

PLC Type FX-Mitsubishi , Name Input / Output PLC :

INPUT PLC :
X000 ; Push Button Start
X001 ; Push Button Stop
X002 ; Micro Switches Wire Out
X003 ; Motor Feedback Alarm

OUTPUT PLC :
Y000 ; Speed Control Motor ( Motor Running )
Y001 ; Single Solenoid Wire Cutters


PLC Mitsubishi Programming :

Download Picture : PLC Mitsubishi Programming

Please Download Programming for GX Developer : PLC Mitsubishi Programming


Reading PLC Programming for Binding Machine :
Step 1 :
If X002 = OFF And X003 = OFF Then ALL Outputs =OFF ( Master Control = OFF ).
Step 2 :
If X000 = ON And X001 = OFF Then M0 = Hold ON ( Latching ) And M1 = Momentary ON ( Pulse ).
Step 3 :
a. If M1 = ON And T0 = OFF Then M2= Hold ON ( Latching ) And T0 Activated.
b. If M0 = ON And T2 = ON And T0 = OFF Then M2 = Hold ON ( Latching ) And T0 Activated.
Step 4 :
If T0 = ON And T1 = OFF Then M3 = Hold ON ( Latching ) And T1 Activated.
Step 5 :
If T1 = ON And T2 = OFF Then M4 = Hold ON ( Latching ) And T2 Activated.
Step 6 :
a. If M2 = ON Then Y000 = ON.
b. If M3 = ON Then Y001 = ON.


For Setting Spiral Length :


See : Simulation Make Timer PLC

See : PLC for Forming of Spiral for Binding Machine

Labels:
Mitsubishi PLC
PLC for Binding Machine
PLC Simulation