Horner has changed control system design concept from a single industry-recognized software package to be integrated, all-in-one unit design system by offering Hardware, Firmware and Software design and development products. For the first time this company provides The XL Series of Operator Control Stations (OCS) and offers robust, reliable control that combine a traditional controller with an operator interface. This complete design control system need combination built-in I/O, networking and removable mass data storage into an integrated, all-in-one unit.
To get better series integrated industrial controls are cost-effective, please spend your time to know more about product specification XL Series of Operating Control System as below:
EXL10 Model HE-EXV1E0 will help user to control process with user friendly modul, eye catch resistive touch screen 5 function keys, 640x480 LCD TFT color graphics display with a high resolution and easy to show feature a built-in logic engine, operator interface, networking and I/O. This logic engine supported by enough capacity memory 1MB with a 0.013mS/K logic scan. It also compatible with Online Programming Mode to be more powerfull speed access process then make logic changes on the fly without going thru stop mode.
EXL6 Model HE-EXL1E0 will present reliable control performance with many benefits. This device supported by USB 2.0 On-the-Go port (mini-B 5pin) available for programming and exchanging files with USB FLASH drives. For connection device to peripheral will conducted by Two (2) RS-232 and one (1) RS-485 port support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols including built-in 10/100 Ethernet port and integrated CsCAN port.
There are many kinds EXL6 Series OCS with DC/Relay I/O based on input and output data requirement such as Twelve (12) Digital Inputs compatible with 12V/24VDC – Twelve (12) DC Outputs - 0.5A per point – Twenty-four (24) Digital Inputs compatible with 12V/24VDC - Two 14-bit/16-bit Universal Analog Inputs supporting 0-10V, 4-20mA, 0-100mV, Thermocouple and RTD Inputs and many others type.
To answer user need for reliable device control system, XL4 Model HE-XC1E0 has expanded to be higher performance that supported by Profibus DP, 2ch/4ch Analog Output, Radio Modem, Telephone Modem, and GPRS Cellular Modem. This device feature a microSD slot, supporting at least 32GB and connected by independent of the serial ports.
Horner products and stock have many types series, start from simple device such as XL4 Series OCS without I/O until high and completed device XL4 Series OCS with DC/DC I/O. Twelve (12) Digital Inputs compatible with 12V/24VDC - four inputs can be used for two 500 kHz High Speed Counters. All of these types can be used as PWM/pulse outputs and need specific Operating Temp (-20°C to 60°C) For quoted T/C specs (0°C to 50°C). Storage Temp (-30°C to 70°C) and humidity 5-95% RH non-condensing.
XL7 Series Model HE-XW1E0 OCS consists of two types mode namely without I/O or with DC/Relay I/O. Both of them have Twelve (12) Digital Inputs compatible with 12V/24VDC and four (4) 12-bit Analog Inputs selectable between 0-10V and 4-20mA, some times inputs can be used for two 500 kHz High Speed Counters.
As data storage memory, this device supporting at least 32GB microSD slot. In advance application, user can set this device to be COM expansion modules option including Profibus DP, 2ch/4ch Analog Output, Radio Modem, Telephone Modem, and GPRS Cellular Modem. It is easy to be set because each COM options are independent of the serial ports.
Xle Model HE-XE100 was completed by RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, Removable Mass Storage device and CANopen Master/Slave Support. This device can be used for 10 kHz High Speed Counting with Analog Inputs selectable between 0-10V and 4-20mA. XLe Series OCS with DC/DC and Universal Analog I/O has two types digital input data requirements, Twelve (12) Digital Inputs compatible with 12V/24VDC and Twenty-four (24) Digital Inputs compatible with 12V/24VDC.
XLt Model HE-XT100 is available as a field installable firmware update, this removes CsCAN support with Twelve (12) up to Twenty-four (24) Digital Inputs compatible with 12V/24VDC. Current voltage input data need Six (6) 14-bit Universal Analog Inputs selectable between Thermocouple, RTD, 0-60 mV, 0-10V and 4-20mA. Proces data system will produce four (4) 12-bit Analog Outputs selectable between 0-10V and 4-20mA. Usr can set based on system specification. For more complex application, user can use XLt Series OCS with High-density DC/DC I/O because it can be used more reliable for 10 kHz High Speed Counting.
To get better series integrated industrial controls are cost-effective, please spend your time to know more about product specification XL Series of Operating Control System as below:
Horner EXL10 feature a built-in logic engine, operator interface, networking and I/O
EXL10 Model HE-EXV1E0 will help user to control process with user friendly modul, eye catch resistive touch screen 5 function keys, 640x480 LCD TFT color graphics display with a high resolution and easy to show feature a built-in logic engine, operator interface, networking and I/O. This logic engine supported by enough capacity memory 1MB with a 0.013mS/K logic scan. It also compatible with Online Programming Mode to be more powerfull speed access process then make logic changes on the fly without going thru stop mode.
Horner EXL6 Model HE-EXL1E0 compatible with PLC/Drive downloadable protocols
EXL6 Model HE-EXL1E0 will present reliable control performance with many benefits. This device supported by USB 2.0 On-the-Go port (mini-B 5pin) available for programming and exchanging files with USB FLASH drives. For connection device to peripheral will conducted by Two (2) RS-232 and one (1) RS-485 port support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols including built-in 10/100 Ethernet port and integrated CsCAN port.
There are many kinds EXL6 Series OCS with DC/Relay I/O based on input and output data requirement such as Twelve (12) Digital Inputs compatible with 12V/24VDC – Twelve (12) DC Outputs - 0.5A per point – Twenty-four (24) Digital Inputs compatible with 12V/24VDC - Two 14-bit/16-bit Universal Analog Inputs supporting 0-10V, 4-20mA, 0-100mV, Thermocouple and RTD Inputs and many others type.
Horner XL4 supported by Profibus DP and GPRS Cellular Modem
To answer user need for reliable device control system, XL4 Model HE-XC1E0 has expanded to be higher performance that supported by Profibus DP, 2ch/4ch Analog Output, Radio Modem, Telephone Modem, and GPRS Cellular Modem. This device feature a microSD slot, supporting at least 32GB and connected by independent of the serial ports.
Horner products and stock have many types series, start from simple device such as XL4 Series OCS without I/O until high and completed device XL4 Series OCS with DC/DC I/O. Twelve (12) Digital Inputs compatible with 12V/24VDC - four inputs can be used for two 500 kHz High Speed Counters. All of these types can be used as PWM/pulse outputs and need specific Operating Temp (-20°C to 60°C) For quoted T/C specs (0°C to 50°C). Storage Temp (-30°C to 70°C) and humidity 5-95% RH non-condensing.
Horner XL7 without I/O or with DC/Relay I/O
XL7 Series Model HE-XW1E0 OCS consists of two types mode namely without I/O or with DC/Relay I/O. Both of them have Twelve (12) Digital Inputs compatible with 12V/24VDC and four (4) 12-bit Analog Inputs selectable between 0-10V and 4-20mA, some times inputs can be used for two 500 kHz High Speed Counters.
As data storage memory, this device supporting at least 32GB microSD slot. In advance application, user can set this device to be COM expansion modules option including Profibus DP, 2ch/4ch Analog Output, Radio Modem, Telephone Modem, and GPRS Cellular Modem. It is easy to be set because each COM options are independent of the serial ports.
Horner Xle Series OCS with DC/Relay I/O
Xle Model HE-XE100 was completed by RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, Removable Mass Storage device and CANopen Master/Slave Support. This device can be used for 10 kHz High Speed Counting with Analog Inputs selectable between 0-10V and 4-20mA. XLe Series OCS with DC/DC and Universal Analog I/O has two types digital input data requirements, Twelve (12) Digital Inputs compatible with 12V/24VDC and Twenty-four (24) Digital Inputs compatible with 12V/24VDC.
Horner XLt Series OCS with High-density DC/DC I/O
XLt Model HE-XT100 is available as a field installable firmware update, this removes CsCAN support with Twelve (12) up to Twenty-four (24) Digital Inputs compatible with 12V/24VDC. Current voltage input data need Six (6) 14-bit Universal Analog Inputs selectable between Thermocouple, RTD, 0-60 mV, 0-10V and 4-20mA. Proces data system will produce four (4) 12-bit Analog Outputs selectable between 0-10V and 4-20mA. Usr can set based on system specification. For more complex application, user can use XLt Series OCS with High-density DC/DC I/O because it can be used more reliable for 10 kHz High Speed Counting.