Thursday, January 28, 2016

Integrated Fuji Electric PLC Communication Module in single system configuration and multi-drop network for highly reliable system at a relatively low cost




Control Level Communication Module is supporting device Fuji Electric PLC in addition to Power Supply Module and CPU Module. As integrated control system device, all of them were supported by the MICREX-SX Series SPH Programming Support Tool. In order to guarantee the program running well, users can download the most recent version of the software from the website at their convenience.

There are 4 models Fuji Control Level Communication Module that popular to be used in the automation industry. Detail product and specification you can check below:

Fuji Electric PLC NP1L Communication Module


NP1L-FL3 completed by SX system loader functions via network to support data exchange and message communication

The NP1L-FL3  has one model namely FL-net OPCN-2 Ver3 which have 100Mbps adaption modul to support data exchange and message communication. It was supported by MICREX-SX SPH Hardware and MICREX-SX SPH FL-net (OPCN-2) Module and can be installed on the base board equipped with CPU (For SPH200, up to two modules).

The NP1L-FL3  completed by up to 8 Computer Level Communication Modules including P/PE-link and SX system loader functions via network


NP1L-LW1 with MICREX-SX SPH Lonworks Interface module to support application data to/from other LONWORKS nodes

The NP1L-LW1  has one model supported by MICREX-SX SPH Hardware and MICREX-SX SPH Lonworks Interface module making it easier to transfer and receive MICREX-SX application data to/from other LONWORKS nodes.

This communication module compatible with the LONWORKS network can be mounted in a single system max. number of NVs: 300, number of CPs: up to 200 intelligent nodes.


NP1L-PL1 completed MICREX-SX SPH P-LINK/PE-LINK Module to support data exchange between processors Broadcast communication

The NP1L-PL1  has two models,  NP1L-PL1  and NP1L-PE1 completed by MICREX-SX SPH Hardware and MICREX-SX SPH P-LINK/PE-LINK Module to support data exchange between processors Broadcast communication and message communication. P/PE-link modules make communications easier in the token passing method can be installed in a single system configuration. In addition, if necessary program upload/download and processor start/stop are available to be got from the host computer.


NP1L-LE1 NP1L-LL2 can be connected either as a multi-drop network or a single loop redundant wiring network

The NP1L-PL1  has two models, namely  NP1L-LE1 and NP1L-LL2 completed by MICREX-SX SPH Hardware and MICREX-SX SPH P-LINK/PE-LINK Module to conduct communication with other nodes connected to the LE-net. LE-net modules can be installed in a single system configuration can be connected either as a multi-drop network or a single loop redundant wiring network enables construction of a highly reliable system at a relatively low cost. If you choose multi-drop network and transmission error occurs data communication between nodes can continue.


Conclusion

Fuji Electric PLC Communication Module is important device in supporting data transfer and processors broadcast communication and message. There are 2 models configuration you can use either single system configuration and multi-drop network. Both of them are effectively for highly reliable system at a relatively low cost.  There are 4 models items Fuji Control Level Communication Module with different specification as mention above. Learn more and use properly and get benefits on that based based on product manual instruction.


Labels:



Newer Post Older Post Home

You may also like these ebook:

Get Free PLC eBook directly sent to your email,
and email subscription to program-plc.blogspot.com




We hate SPAM. Your information is never sold or shared with anyone.

Your Email Will Be 100% Secured !