MicroSmart offers you all the advantages of PID rapidly and simply with not any of the drawbacks. No additional parts required. Proportional Integral Derivative (PID) is a general component for industrial control that utilizes methods of loop feedback to keep up a set variable of process, for example pressure control or temperature. This loop permits precise maintenance and the set point stabilization, correcting the outputs of control based on history, or change on an error rate of signal. When you desire the PID loops stability offer, but don’t have the experience or time that programming of PID needs, turn to IDEC. These controlling but easy to apply PID algorithms are integrated with the controllers of MicroSmart. You can choose from a variety of control modes with Advanced Auto-tuning or Manual, Auto-tuning. A wide various alarms and tools of conversion are offered as well, and the dialog box of software is one of the easiest methods to execute PID rapidly.
• Program with MicroSmart up to 14, with Pentra up to 56 loops
• The dialog box of PID works throughout customization of algorithm
• Sophisticated feature of auto-tuning creates instructions of programming PID easy, even for people with minimal experience in algorithm
• Pre-defined parameters to avoid wasting extra time key in them manually
Master/Slave of Modbus
Ideal and across devices for communication of wireless, the protocol of Modbus messaging is a must-have for networking industry, truly open standard. If you require to set up communication between multiple instruments from monitor remote devices through a PC or HMI, multiple manufacturers, or simply desire to employ the most broadly used protocol of network, using Modbus.
Datalink of RS485
IDEC PLCs can build a system of master-slave for other controllers of IDEC with up to 31 slave stations via RS485, with the accessible ports of communication and modules of RS485. Connect, join two wires, and you are on the method to a valuable, faultless network that can be extensive up to 200 m.
All modules of MicroSmart support communication of RS485, so you can comprise your existing controllers of IDEC in a new or more robust system monitoring. You should guess it to be typical in all controllers with something this necessary. IDEC recommends support for ASCII and Modbus RTU, allocating the MicroSmart to be slave or master on any network of Modbus. Don’t purchase a different converter when you can purchase a controller that does it all as above mention.
Labels:
MicroSmart PLC
MicroSmart PLC