Mass Flow Meters Product Specification to identify the material balance, and billing operations and the transfer of detainees throughout the industry

Mass flow meter is known as the basis of most of the drafting of a prescription. This is to identify the material balance, and billing operations and the transfer of detainees throughout the industry. Being the most important flow in the processing plants, reliability and accuracy of detection is very important mass flow measurement.

In the past, Mass flow meter is often calculated from the output of the volumetric flow meter and measure the intensity of light. Either directly measuring the density, or calculated using the output of the temperature and pressure transmitters process. But these kinds of measurements are not very accurate. This is because the relationship between the density process and pressure or temperature is not exactly always known - all sensors and adds him

Image by https://www.dakotainstruments.com

Mass Flow Meters Product Specification

Mass flow meter Dakota products are not affected by changes in temperature and pressure within the stated limits. This is because they use the principle of the overall process flow. Gas meter is divided into two tracks laminar flow, and one through the primary flow channel. The other through a tube sensor noodles. Flow channels ensure laminar flow, and therefore the proportion of fixed flow rate. There are many products you can choose, some of them are:

1. GM1 Series - Air Mass Flow Meter

This mass flow meter uses soft and rugged material with low voltage analog data output. The compact design and self-sustaining mass flow meter will read the gas flow rate. Rugged Mass flow meter designed together with the availability of measurement versatile and economical means of grade flow measurement accuracy.

This Mass flow meter product is available in ranges of flow of 10 ml / min to 1000 L / min for nitrogen. It is calibrated every model in place with a wide range of gas, including gas mixtures are introduced. Gases and gas mixtures are not displayed to consult with Dakota. The flow rate is not affected by variations in temperature and pressure within the stated limits.

2. GM5 Series - Helium Mass Flow Meter

This helium mass flow meter uses aluminum, high flow, and low voltage analog data output. This product includes the mechanical layout of the design optional LCD readout built in the upper part of the transformer. Tilt unit reading of more than 90 degrees to provide optimal reading comfort. Aluminum models use stainless steel with a choice of either reading engineering units (standard) or 0-100 Showing percent available. Adapter was connected by a standard modular plug, and also easily removable for remote reading installations.

Conclusion

Mass flow meter can also block weighing flow through force or through a combination of a tiny sensor level with the measurement of light intensity measurement. Another way that is used is two transmission d / p devices for installation in the lower part of the atmosphere of the tank at different heights. This pressure difference generates density of matter in the tank. System was used to measure the total mass flow of mud and identify the material balance, and billing operations and the transfer of detainees throughout the industry.

Labels:
Automation
Dakota Instruments
Flow Meter
Flow Sensor
Product News
Sensor